Stallions Satellite and Antenna

Coaxial Cable

Very high quality, commercial grade coaxial cable - MADE IN USA
NEC CATV CL2 CSA CXC FT1 rated
100% swept tested from 5 MHz-1 GHz with a minimum signal return loss of 20 dB
100% shielded with Duobond® II+ 60% aluminum braid + Duofoil® aluminum foil tape + 40% aluminum braid
Copper covered steel center conductor

RG-6 Model: 9116

Belden's model 9116 is a PVC jacketed RG-6 type coaxial cable suitable for most indoor installations where the total length of the cable run is 200 feet or less.

Belden's model 9116 is a PVC jacketed RG-6 type coaxial cable with an 18 gauge copper covered steel center conductor and has a gas-injected foam polyethylene insulation. The cable is 100% swept tested from 5 MHz-1 GHz and is 100% shielded with Duobond® II and a 60% aluminum braid shield and has a PVC jacket.

The Belden model 9116 is available in black, white, neutral and beige colors.

$0.25 Per Foot or $125.00 Per 1000' UnReel® Box.

RG-6 Model: 1545A

Belden's model 1545A RG-6 coaxial cable is similar to model 9116, but has a sticky film between the braiding and the outer jacket that prevents moisture from corroding the braiding and allows for the cable to installed anywhere outside or even buried.

Belden's model 1545A is a PVC jacketed RG-6 type coaxial cable with an 18 gauge copper covered steel center conductor and has a gas-injected foam polyethylene insulation. The cable is 100% swept tested from 5 MHz-1 GHz and is 100% shielded with Duobond® II and a 60% aluminum braid shield with CoreGuard® and has a black PVC jacket.

The Belden model 1545A is only available in black color.

$0.25 Per Foot or $125.00 Per 1000' Spool.

RG-6 Quad Shield Model: 1189A

Belden's model 1189A is a PVC jacketed RG-6 type quad shield coaxial cable for installations where there is a high probability for interference.

Belden's 1189A cable has an 18 gauge copper covered steel center conductor and has a gas-injected foam polyethylene insulation. The cable is 100% swept tested from 5 MHz-1 GHz and is 100% shielded with Duobond® IV, which is a Duobond® II+ with 60% aluminum braid + Duofoil® aluminum foil tape + 40% aluminum braid.

The Belden model 1189A is available in black, white, and neutral colors.

$0.40 Per Foot or $225.00 Per 1000' UnReel® Box.

RG-11 Model: 9064

Belden's model 9064 is a PVC jacketed RG-11 type coaxial cable suitable for installations where the cable run will be longer than 200 feet or the installation site is in a very weak signal area and minimum signal loss is a must.

Belden's model 9064 is a PVC jacketed RG-11 type coaxial cable with an 14 gauge copper covered steel center conductor and has a gas-injected foam polyethylene insulation. The cable is 100% swept tested from 5 MHz-1 GHz and is 100% shielded with Duobond® II+ 60% aluminum braid + Duofoil® aluminum foil tape + 40% aluminum braid.

The Belden model 9064 is available in black, white, and orange colors.

$0.50 Per Foot (Min. order of 150') or $275.00 Per 1000' Spool.

RG-11 Model: 1525A

Belden's model 1525A RG-11/U coaxial cable is similar to model 9064, but is for installations where a burial-type cable is needed, such as a cable run between a remotely mounted TV antenna on a hilltop and the house or building several hundred feet away down the hill.

Belden's model 1525A is a PVC jacketed RG-11 type coaxial cable with a 14 gauge copper covered steel center conductor and has a gas-injected foam polyethylene insulation. The cable is 100% swept tested from 5 MHz-1 GHz and is 100% shielded with Duobond® III 61% aluminum braid + CoreGuard®.

The Belden model 1525A is available in black, white, and orange colors.

$0.45 Per Foot (Min. order of 150') or $250.00 Per 1000' Spool.

To place an order please contact us.