Hall Sensor Control : Satellite dish control accuracy is now applied to off-air antenna position control. Unlike all other rotators, this unit does not rely on timing. The hall sensor counts every motor revolution resulting in 2° accuracy

   High Torque : 120 inch lbs. of mechanical torque to handle up to a 131" boom length.

   Preamp Power : 17 VDC at 50 mA (max) when used with a preamp. If a preamp is not used, this is automatically sensed and the preamp power is switched off

   Display & Control : The indoor controller features a 000° to 450° digital compass display. 1.25 total rotation (450°) to allow for easy pointing to stations that are either side of north. Several methods of antenna control are provided, including:

• Up/down through the digital compass display
• Direct Access to a location (e.g.180° for south)
• 99 programmable memory locations, which can be assigned the same number as the channel being received

   Handheld IR Remote : Software codes available on most higher end universal remote controls

   Can Be Controlled Anywhere In Your House With an Optional Remote Control Extender

   Non-Volatile Memory Holds Locations During Power Failures

   1-Year Manufacturer Warranty

   Made In China

Do not use coax cable with a copper covered steel center conductor as it has approximately three times the DC resistance of coax with a solid copper center conductor. If coax with a copper covered steel center conductor must be used the maxium distance between the outdoor motor and the indoor control unit is 75' and a preamp powered by the same coax is not recommended. For proper coax cable recommendations see the table below.